Klintensiv® Atomizer – 2L, 24V

Klintensiv^® Atomizer – 2L, 24V

Fine spray for rapid disinfection, 5–8 m coverage

The Klintensiv® atomizer is designed to finely spray liquid disinfectants from the Klintensiv range, ensuring uniform coverage and high efficiency, with no subsequent wiping required*. Ideal for sanitary units, homes, offices, HoReCa, schools, and vehicle fleets.

*When used with the appropriate application solution (e.g., Klintensiv® HOCl), it can eliminate up to 99.9% of bacteria, viruses, and fungi and is safe for food-contact surfaces, according to the intended use of the product used.

✔ Use Klintensiv disinfectant for maximum protection
✔ No wiping required after application (check solution instructions)
✔ No aggressive vapors, no sticky residues

Main benefits

• Long spray range 5–8 m (in windless conditions) for rapid coverage of large surfaces
• Adjustable flow 80–150 ml/min for optimal dosage and reduced consumption
• Droplets under 50 µm for a fine film and short drying time
• Autonomy 50–60 min on a single charge; full charge ~4h
• 2 L tank – fewer refills, increased productivity
• Portable, ergonomic, easy to operate

Areas of use

Hospitals and clinics, offices, restaurants & cafes, hotels, schools/kindergartens, retail spaces, conference halls, reception areas, personal and fleet vehicles, warehouses/logistics, common living spaces.

Technical specifications

• Power supply voltage (battery): 24 V DC
• Battery capacity: 8 Ah
• Rated power: 240 W
• Spraying speed (adjustable): 80 – 150 ml/min
• Droplet size: < 50 microns
• Jet/mist coverage (no wind): 5 – 8 m
• Tank capacity: 2 liters
• Full charge time: ~4 hours
• Autonomy per charge: 50 – 60 minutes
• Package dimensions: 68.5 × 27.5 × 18 cm

How to use

1. Fill the tank with the Klintensiv liquid disinfectant suitable for the application (low viscosity, water-based).
2. Turn on the device and set the flow rate according to the surface/volume.
3. Spray from 1–2 m for nearby objects/surfaces and adjust the distance for coverage up to 5–8 m.
4. Observe the contact time indicated by the disinfectant product.
5. Wiping is not necessary if the chosen product specifies "no rinsing/wiping".

Compatibility & safety recommendations

• Compatible with water-based liquid disinfectants from the Klintensiv range (e.g., HOCl, QAC RTU, low alcohol if permitted by the solution manufacturer and working conditions).
• Do not use gels, highly viscous solutions, solutions containing solid particles, or solvents/alcohol in high concentrations (risk of flammability).
• Clean the tank and the circuit by rinsing with water when changing solutions.
• Use PPE according to the data sheet of the sprayed product (gloves/goggles/mask, as appropriate).
• Keep out of reach of children. Avoid contact with eyes/skin. Ventilate the area.