Klintensiv® Ultrasound Gel – Class I medical device

Klintensiv^® Ultrasound Gel – Class I medical device
Optimal contact. Stable signal. No sticky residue.

Product description

Colorless or opalescent conductive gel, with high viscosity, created for ultrasound diagnostics, ultrasound therapy, and as an ECG contact medium. Does not stain, does not discolor, does not leave a sticky feeling after use, and contains no fragrance, sodium chloride, alcohol, phenols, or aldehydes. Dermatologically tested – well tolerated by the skin.

Benefits

• Excellent acoustic/electric contact – efficient signal transmission
• High viscosity – adheres well, does not drip
• No residue – easy to remove, no traces
• Fragrance-free & NaCl/alcohol-free – high skin tolerance
• Does not stain, does not discolor equipment/fabrics

Fields of use

• Ultrasound examinations (diagnostic)
• Medical ultrasound therapy
• ECG conductor between electrodes and patient's skin

Instructions for use

1) Ultrasound (diagnostic):

• Apply as is to intact, clean, and dry skin; a thin layer, sufficient for the examined area.
• Distribute the gel with the ultrasound probe.

2) Ultrasound therapy:

• Apply as is to intact, clean, and dry skin.
• Place a small amount on the treated area and distribute with the probe using small, tight circular motions.

3) ECG:

• Clean the skin (free of cream/oil/perspiration).
• Apply a thin film in the electrode placement areas; spread evenly.
• Attach the electrodes and check the signal stability.

After the procedure: remove the gel from the skin with disposable wipes; clean the probes/electrodes according to the manufacturer's instructions.
Important: keep the container tightly closed after each use.

Warnings

General:

• For external use only; apply only on intact skin.
• Not sterile.
• Do not use for defibrillation paddles.
• Do not insert objects/substances into the container.
• Do not use if the product is expired or under conditions other than those recommended.

Ultrasound therapy – DO NOT use:

• On open wounds / acute infections / fractured bones
• During pregnancy; near/over a pacemaker or electrical stimulation devices
• On metastatic lesions, areas with reduced sensitivity, metal implants
• Around the eyes, breasts, genitals
• On active epiphyses in children

Technical specifications

• Composition: water, glycerin, carbomer, propylene glycol, preservatives (sodium benzoate), sodium hydroxide (pH adjuster)
• Appearance: colorless, slightly opalescent gel, specific odor
• pH: 5 ± 1 │ Soluble in water

Safety & compliance

• Consult and comply with the SDS/MSDS (available from the supplier / klintensiv.com).
• Class I medical device.

Packaging & logistics

Packaging & logistics

• Bottle: 500 ml — 18 units/case
• Bottle: 1000 ml — 12 units/case
• Canister: 5 liters

Shelf life, storage & recycling

• Shelf life: 3 years from the date of manufacture
• Storage: in the original container, 5–30°C
• After emptying, rinse with water and recycle as plastic waste

Useful information

Details and expert opinions: www.klintensiv.ro
Questions: office@klintensiv.ro | 021/44.81.498